Miscellaneous Programming; Program 1500 - Macro Key Sequence Programming - Sam4s ER-380 Operation And Program Manual

Miscellaneous Programming

Program 1500 - Macro Key Sequence Programming

Macros are special function keys that are used to execute a sequence of key depressions. For
example, a macro might be used to execute a string of reports or to automatically tender a
preset amount. Up to ten different macros may be placed on the keyboard. (See "Function
Key Assignment Programming" to place macros on the keyboard.)
To Program a Macro
1. Turn the control lock to the P position.
2. To begin the program, enter 1 5 0 0, press the SBTL key.
3. Press the Macro key that you wish to program.
4. First, you must change the Mode Key. Default Mode is PGM Mode.
5. Turn the control lock to the P position. Press the same Macro key to end the
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to
To removing a Macro
If you wish to remove a keystroke from a macro, replace the current function with the
INACTIVE function.
180 • Program Mode Programming
1 5 0 0
MACRO
Therefore, if you want to start in REG Mode, you must change Mode key to REG
Mode. Type up to 50 key stokes
Ty pe up to 5 0 key strokes
sequence
MACRO
finalize the program.
CASH
SBTL
Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU