Printing The Date And Time Only (No Meter Stamp) - Pitney Bowes DM100i Operator's Manual

Printing the Date and Time Only (no meter stamp)

You may want to use this feature to time-stamp incoming mail or sen-
sitive documents.
1. Press Print Menu.
2. Select "Date & Time Only".
PRINT MENU
◄Seal Only
◄Date & Time Only
◄Ad Only
The "Date and Time Only - No Postage Printing" screen ap pears.
3. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the time
and date and ejects the envelope/
tape sheet.
NOTE:
i
mail piece so the date and time
prints on a blank section of the
mail piece.
4. Select "Exit Date and Time" when finished to return to the Home
screen.
SV62276 Rev. D
Make sure you orient the
4 • Printing Options
4-11