At Mailing Machine - Pitney Bowes DM100i Operator's Manual

6 • Adding Postage/Connecting to Data Center
Adding Postage

At Mailing Machine

1. Make sure your machine can make connection to the Data Center.
2. Press Add Postage.
3. You may select "Add $xx" to add the amount shown.
OR
Select "Add another amount". Key in the amount, in whole dol-
lars, that you want to add and select "Continue".
ADD POSTAGE TO METER
◄Add $xx
◄Add another amount
◄Check PBP balance
NOTE 1:
i
NOTE 2:
i
represents the amount of postage you added the last time.
4. The system connects to the Pitney Bowes Data Center (this may
take a few moments). Various screens display, letting you know
the status of the process.
5. The Transfer Successful screen displays.
TRANSFER SUCCESSFUL
Added
Available
Receipt? (Yes or No)
– the amount of the postage downloaded into the meter.
Added
– the amount of postage available to use in the meter.
Available
This represents any balance you had in the meter before adding
postage, plus the refill amount.
SV62276 Rev. D
The minimum amount of postage you can add is $1.
The amount shown in the "Add $xx" selection line
$xx
$xx
6-11