Connect the cord to the four-way RJ11 connector on the CCU.
Connect to the PC using either the six-way RJ plug or the cord and DB9 converter as required.
The pinouts from the RS 232 interface of the DB9 to the RJ11 are:
Extension Module MDF Connections
The connections on the Extension module are shown below.
·
Eight RJ11 connectors for the extensions
·
Four RJ11 connectors for the CO lines
·
Two RJ11 power failure connectors
42
DB9 connector
RJ11 plug
2
4
3
3
5
1
EncoreCX
Installation & Maintenance Manual