EncoreCX
Installation and Maintenance Manual
Installation steps
Carry out the following steps to install the system:
FIRST, read the safety and precaution information on page 12 carefully.
SECOND, mount the Main Equipment as detailed in the section starting on page 16.
THIRD, install the CO line and expansion modules as required.
At least one CO line module must be installed to access the CO network.
An Extension module must be installed if the following is required:
·
More than 8 extensions
·
More than four CO lines
An Internet Router Module must be installed if an internal LAN or connection to a DSL Line or Cable
Modem is required.
A Voice Module must be installed to provide Voice Mail, Customized Courtesy Service or Auto-
Attendant functionality.
The Battery Back Up module and battery must be installed if battery back up is required.
FOURTH, cable the extensions to the Main Equipment and install the system digital telephone sets
and standard telephones as detailed in the Cabling Section starting on page 39. This section also
covers installation of the following:
· Door Phone
· Doorstrike
· External Music-On-Hold
· Public Address
· RS 232 Interface to provide Call Logging
FIFTH, cable the CO line connections as detailed in the cabling section starting on page 39.
SIXTH, Power up the system and provide customer training as detailed on page 56.
15