Error Codes; General - Formax 6900 Series Operator's Manual

8. 8. 8. 8.

ERROR CODES

ERROR CODES
ERROR CODES ERROR CODES
8.1 8.1 8.1 8.1

General

General General General
The central display of the inserter will display all system-wide errors that occur. When an error occurs, read the information on the screen, press the info key for more information. Follow the
instructions. Generally an error number will be given. This number can be used for reference.
error description error description error description error description
Envelope stoppage.
Envelope stoppage.
Envelope stoppage.
Envelope stoppage.
Envelope stoppage.
Wrong envelope size or too many enve-
lopes fed
Closed envelope ?
Document stoppage.
Document stoppage.
Document stoppage.
Not enough documents inserted
To many documents inserted
Envelope stoppage.
Envelope stoppage.
Envelope stoppage.
suggested solution suggested solution suggested solution suggested solution
Remove envelope,
readjust the envelope separation.
Remove envelope,
readjust the envelope separation.
Remove envelope.
Remove envelope.
Remove envelope.
Remove envelope,
place the correct envelopes in the hop-
per.
Put an open envelope in the hopper.
Remove document.
Remove document.
Remove document.
Remove envelope and check contents,
reset thickness detection.
Remove envelope and check contents,
reset thickness detection.
Remove envelope.
Remove envelope.
Remove envelope.
see also.... see also.... see also.... see also.... information information information information
Page 7. Envelope longer than reference length.
Page 17.
Page 6. Envelope doesn't reach the "track" sensor.
Page 17.
Page 26. Envelope doesn't reach the "track" sensor.
Page 26. Envelope doesn't reach the "flap" sensor.
Page 26. Envelope not opened or already opened in the
envelope hopper.
Page 17. Wrong envelope size or separation not correctly
Page 26. adjusted.
probably closed envelope in hopper.
Page 26. Document doesn't reach the "input" sensor.
Page 26. Document doesn't clear the "input" sensor.
Page 26. Insert failure: Document is not clearing the "loc" sen-
sor.
Page 15 Document too thin.
Page 26.
Page 15 Document too thick.
Page 26.
Page 26. Document doesn't clear the "eject" sensor.
Page 26. Document doesn't reach the "exit" sensor.
Page 26. Document doesn't clear the "exit" sensor.
1-800-543-5454
www.officezone.com
Error code Error code Error code Error code
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
29/40 29/40 29/40 29/40