Formax 6900 Series Operator's Manual page 35

50 sheets
See FE-8 operator manual, section 5.3. The maximum
amount of pages in a set can now be set to 50.
Flexible reading
The FE-8 is capable of reading OMR codes other than the
standard built-in Formax code. Besides that, more than one
reading code can be programmed. If this is the case, the
Settings menu, see FE-8 operator manual section 5.3, will
contain an additional sub menu "6. Flex reading", "Code
x", where x is a number. Using the + and - key a number
corresponding to the appropriate code can be selected.
34/40 34/40 34/40
Matching of two personalised documents
To solve applications where the enclosure must match the
address, the transport unit TR-7A can accommodate two
OMR systems. The most upstream OMR system (FE-8 or
AS-1A) will feed and read the address carrier with OMR
code while the second - downstream- OMR system (FE-8)
will feed and read the enclosure with OMR code.
This matching of two document streams means that both
OMR systems control the integrity of the stack, by means of
a sequence check, independently from each other. This
means that at the start of a job the operator must check that
the first documents fed from both feeders match.
1-800-543-5454
www.officezone.com
AS-1A AS-1A AS-1A AS-1A
OMR reading code
The OMR reading code of the AS-1A can contain
additional marks to:
• select other feed units on the transport unit to feed.
• control the moistening system of the inserter.
• select the exit of the sorter.
• select the hopper of the inserter (Automix
• check the sequence of the pages fed (additional security).
• check the OMR reading code (additional security).
Fig. 41
TM
).