Selecting A Job; Test Run Menu - Formax 6900 Series Operator's Manual

5.4.3 5.4.3 5.4.3 5.4.3

Selecting a job

Selecting a job Selecting a job Selecting a job
After pressing key 2 in the "main menu", the display shows
the "select job" menu (see Fig. 16). The "select job" menu
shows the following functions:
• job data (key 1).
• select a higher job number (key 3).
• select a lower job number (key 4).
• confirm with "OK" (key 6) which will get you back to the
"main menu".
Only programmed jobs can be selected (maximum of 9
jobs).
Fig. 16
5.4.4 5.4.4 5.4.4 5.4.4

Test run menu

Test run menu Test run menu Test run menu
After pressing key 3 in the "main menu" a test run screen will
be displayed. In case an FO-2A is used the screen as
shown in fig. 17 will appear. The purpose of the test run
menu is to check proper envelope feed and to make
adjustments to the envelope stop settings.
The "test run" menu shows the following functions:
• feed one envelope (key 2).
• insert one document (key 3).
• envelope stop position to the right (key 4).
• envelope stop position to the left (key 5).
• confirm settings and return to the main menu (key 6).
Fig. 17
In case an FO-3 is used, a screen as shown in fig. 18 will be
displayed. The envelope position keys 4 and 5 of figure 17
have moved to a new submenu (see fig. 18, key 4): after
pressing key 4 this submenu will be entered and the
possibility of adjusting the envelope stop position to the left
or right is available again.
After pressing key 5 a submenu will be entered for fine
tuning the folder settings. For more information see "Fine
tuning the folder settings".
In case the inserter is equipped with a second envelope
hopper (EF-3) the test run menu has been extended and the
following functions for key 1 and 2 have become available
(see fig. 18 for an example):
• feed one envelope from the standard hopper (key 1).
• feed one envelope from the second hopper EF-3 (key 2).
1-800-543-5454
www.officezone.com
11/40 11/40 11/40 11/40