Additions To The Error Lists Of Other Modules - Formax 6900 Series Operator's Manual

error description error description error description error description
Unknown set.
Configuration does not match.
System can not be set.
8.2 8.2

Additions to the error lists of other modules

Additions to the error lists of other modules
8.2 8.2 Additions to the error lists of other modules Additions to the error lists of other modules
error description error description error description error description
Document stoppage.
Document stoppage.
Feeding failure.
System blocked.
Document stoppage.
30/40 30/40 30/40
suggested solution suggested solution suggested solution suggested solution
Remove set.
Switch the inserter off and restore the
configuration.
Select job again.
suggested solution suggested solution suggested solution suggested solution
Remove documents.
Remove documents.
Remove documents.
Remove envelope and check contents,
reset thickness detection.
Remove envelope and check contents,
reset thickness detection.
see also.... see also.... see also.... see also.... information information information information
Page 26. During the system startup a set has been detected.
Remove this set.
A module of the system has been removed.The con-
figuration is not corresponding with the selected job.
The job settings can not be transmitted correctly.
Check if of all covers are closed.
see also.... see also.... see also.... see also.... information information information information
The document (that has been delivered by the Side
Feed unit) does not move during a TR-7A finger
cycle. Clear the paper jam.
The document to be delivered by the Side Feed unit
does not reach the TR-7A track. Remove paper jam
and adjust arm height of the Side Feed unit.
The Side Feed Unit (PF) is empty. Refill the document
hopper.
The fold unit (FO-2A, FO-3) is either not present or
not correctly placed (this is indicated by a
microswitch that blocks FO operation). Place or cor-
rectly place the fold unit.
The document does not reach the output of the
folder. This is likely caused by a paper jam in the
FO.
1-800-543-5454
www.officezone.com
Error code Error code Error code Error code
62
67
68
Error code Error code Error code Error code
80
81
120
1
2