Formax 6900 Series Operator's Manual page 21

Folder/inserter

Table of Contents

Transport unit TR-7A, TR-1B

Action

Refer to the operator manuals of these modules if required.

• If necessary adjust the module TR-7A.

Note 1: With the 6900 Series selection of a mode at the TR-7A is not applicable.

Note 2: Information about where to put the address carrying documents and the enclosures can be

found in the job info menu of the inserter.

Note 3: It is possible that there is no TR-7A fold/no fold selector available. In that case the TR-7A is

equipped with so called Twin cycle facility that automizes this setting (see options).

• If necessary adjust the module TR-1B.

Fold unit FO-3, FO-2A

Action

Refer to the operator manuals of these modules if required.

• For the FO-3 no adjustments have to be made.

• The fold unit has to be set such that the folded documents fit in to the envelope.

Feed stations FE-1M, FE-8, FE-7, FE-9, ST-1, PF-45A, PF-65A, SF-4/6

Action

Refer to the operator manuals of these modules if required.

• If necessary adjust the modules FE-7, FE-8, ST-1, PF-45A, PF-65A.

• If necessary adjust the module FE-9.

• If necessary adjust the module FE-1M. Set the document hopper guides and the separa-

tion.

• Fill the hoppers of the feed units with documents.

20/40

Refer to..

Refer to the chapter "Adjustments" and follow the instructions.

Refer to..

Refer to the chapter "Adjustments" and follow the instructions.

Refer to..

Refer to the chapter "Adjustments" and follow the instructions.

Refer to the chapter "Settings" and follow the instructions.

Refer to the sections "Side guide adjustment" and "Separation

adjustment".

Refer to the operator manuals of the feed units.

1-800-543-5454

www.officezone.com

Table of Contents