Non-Genuine Mode; Using The Operator Panel - Fuji Xerox DocuPrint CM215 series User Manual

Non-Genuine Mode

When toner within a toner cartridge is empty, the XXXX Cartridge is Close to Life or
Replace XXXX Cartridge (XXXX: Yellow, Magenta, Cyan, or Black) message appears.
When you want to use the printer in the Non-Genuine Mode, enable the Non-Genuine Mode and
replace the toner cartridge.
IMPORTANT:
• If you use the printer in the Non-Genuine Mode, the performance of the printer may not be at its optimum. Any
problems that may arise from the use of the Non-Genuine Mode are not covered by our quality guarantee.
The continuous use of the Non-Genuine Mode can also cause the printer to break down, and any repair
charges for such break down will be incurred by users.
NOTE:
• To disable the Non-Genuine Mode, select Off for Non-Genuine Mode on the operator panel or deselect the
check box next to On on the Non-Genuine Mode page on the Printer Maintenance tab in the Printer Setting
Utility.
 Using the Operator Panel
NOTE:
• Before starting the operation described below, confirm that the Select Function screen is displayed on the
LCD panel.
1
Press the System button.
2
Select Admin Menu and then press the
3
Select Maintenance and then press the
4
Select Non-Genuine Mode and then press the
5
Select On and then press the
6
Press the button until the top page is displayed.
The printer switches to the Non-Genuine Mode.
378 Troubleshooting
button.
button.
button.
button.