Non-Genuine Mode - Fuji Xerox DocuPrint CP315 dw User Manual

Non-Genuine Mode

When you want to use the printer in the Non-Genuine mode, enable the Non-Genuine mode and replace the
toner cartridge.
Note
• If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its optimum. Any
problems that may arise from the use of the Non-Genuine mode are not covered by our quality guarantee. The
continuous use of the Non-Genuine mode may also cause the printer to break down, and any repair charges for such
break down will be incurred by users.
• To disable the Non-Genuine mode, select [Off] for Non-Genuine toner on the operator panel.
1.
Press the
2.
Press the or
3.
Press the or
4.
Press the or
5.
Press the or
The printer switches to the Non-Genuine mode.
170
User Guide
<Menu> button.
button to select [Administrator Menu], and then press the
button to select [Maintenance Mode], and then press the
button to select [Non-Genuine], and then press the
button to select [On], and then press the
button.
button.
button twice.
button.