Non-Genuine Mode - Fuji Xerox DocuPrint P365 d User Manual

Non-Genuine Mode

When toner within a toner cartridge is empty, the Replace Toner Cartridge message appears.
When you want to use the printer in Non-Genuine mode, program the mode and replace the toner cartridge.
IMPORTANT:
•
If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its optimum. And any problems that
may arise from the use of the Non-Genuine mode are not covered by our quality guarantee. The continuous use of the Non-Genuine
mode can also cause the printer to break down, and any repair charges for such break down will be incurred by users.
NOTE:
•
Before starting the operation described below, confirm that Ready is displayed on the LCD panel.
1
Press the (Menu) button.
2 Select Admin Menu, and then press the
3
Select Maintenance Mode, and then press the
4
Select Non-Genuine, and then press the
5
Select Toner, and then press the
6
Select On, and then press the
The printer switches to the Non-Genuine mode.
182
Troubleshooting
button.
button.
button.
button.
button.