Maintenance Mode; Panel Settings - Fuji Xerox DocuPrint C525 A User Manual

Maintenance Mode

Use this menu to initialize the NV (non-volatile) memory, configure the plain paper or labels
quality adjustment settings. Also, use this menu to adjust the reference voltage for the
transfer roller of each paper type.
Item
Adjust Paper Type
Adjust BTR
Initialize NVM

Panel Settings

Specifies whether to limit menu operations with a password to avoid changing the printer
settings by accident.
Item
Panel Lock
Change Password
Specifies the paper density of plain paper and labels.
• [Plain] (default: [Heavy 65 - 80 g/m
Selects the density for the plain paper from [Light 60 - 75 g/m
2
g/m ].
• [Label] (default: [Label 2])
Selects the density for the labels from [Label 1] and [Label 2].
Specifies the value of the reference voltage for the transfer roller. You can specify the
value between 0 to 15 for each paper type.
• [Plain] (default: [5])
• [Bond] (default: [5])
• [Transparency] (default: [5])
• [Heavyweight 1] (default: [5])
• [Heavyweight 2] (default: [5])
• [Label] (default: [5])
• [Coated 1] (default: [5])
• [Coated 2] (default: [5])
• [Coated 3] (default: [5])
• [Envelope] (default: [5])
• [Postcard] (default: [5])
Initializes the NV (non-volatile) memory. The NV memory is a nonvolatile memory that
stores the printer settings even after the power is switch off. After executing this function
and restarting the printer, all the menu parameters are reset to their default values.
Note
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting, switch
off the printer and then switch it on again.
Specifies whether to limit the menu operations with a password. Selecting [Enable]
requires the operator to enter the password. If [Enable] is set, then you must enter a
password to use the [Admin Menu]. The default is [Disable].
Sets the four-digit password. The default is [0000].
If you forget your password, switch off the printer. Then, recover the password setting to
default with following procedure.
1. Switch on the printer while holding the <Menu> button. Continue to hold the Menu
button until the display indicates "Reset password. Reset?"
2. Release the <Menu> button and press the <Eject/Set> button.
3. Press the < > button to select [Yes], then press the <Eject/Set> button. This will
recover the factory default password.
Description
2
])
Description
4.2 Description of Menu Items
2
] and [Heavy 65 - 80
43