• LetterH Dup Mode
Purpose:
To specify whether to print on both sides when you use letterhead.
Values:
*
Disable
Enable
• Low Toner Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
*
On
Maintenance Mode
Use the Maintenance Mode menu to initialize the NV (non-volatile) memory, configure the plain
paper quality adjustment settings, and configure the security settings.
NOTE:
•
Values marked by an asterisk (*) are the factory default menu settings.
• F/W Version
Purpose:
To confirm the current F/W version.
• Adjust PaperType
Purpose:
To specify paper density settings.
Values:
Plain
Labels
163
Using the Operator Panel Menus
Does not print on both sides of letterhead.
Prints on both sides of letterhead.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Lightweight
*
Heavyweight
Lightweight
*
Heavyweight