Record Limit; Backup Mode - Digimerge VB300 SERIES Instruction Manual

RECORD LIMIT

Set a recording limit for your system.
Figure 10.7 Setting the Record Limit
To set the record limit:
1. Press the buttons to set the value for
the record limit. Set from 1~6 days, 1~4
weeks, 1~11 months, 1 year, and OFF.
2. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.

BACKUP MODE

Use Backup Mode to automatically copy
recorded events (motion detection, alarm,
video loss) to an external USB HDD, or to
enable disk mirroring. Mirroring enables the
system to write data to the internal hard drive
and an external USB hard drive(s)
simultaneously.
Note: In order to use Event or Mirror
backup, you must have at least one external
USB hard drive connected to the USB port
on the rear panel of the system.
Figure 10.8 Backup Mode: Event
Event
With your Backup Mode set to Event, the
system will copy only recorded events (motion
detection, alarm, video loss) to a connected
USB external hard drive.
To set Event backup mode:
1. Select BACKUP MODE.
2. Press the buttons and select EVENT.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
Using the Main Menu
37