Advanced Setup (Cont'd.) - Digimerge VB300 SERIES Instruction Manual

Using the Main Menu

ADVANCED SETUP (cont'd.)

User Authority
Set the limits and parameters for users of the
system.
Figure 12.5 Advanced Setup menu
To set user authority:
1. From the Advanced Setup menu, select
USER AUTHORITY and press the
button.
2. Press the
the following options:
• REC
• SEARCH&PLAY
• COPY
• LIVE AUDIO
• DVR SETUP
• DVR STATUS
• PTZ CONTROL
3. Press the
(U1~U4). Press the
authority ON/OFF.
Note: If ON, the user password will be
required to perform the desired function. By
default, all authorities are set to OFF.
4. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
46
buttons to select from
buttons to select a user
buttons to set the
DVR MENU SETUP
Use the DVR Menu Setup option to save your
system settings to a USB flash drive, load
system settings, and restore system settings to
factory defaults.
To save your system settings:
1. Insert a USB flash drive into the USB port
on the front panel of the system.
2. From the Advanced setup menu, select
SAVE MENU TO FILE and press the
button.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
To load system settings:
1. Insert the USB flash drive with your
previously saved system settings into the
USB port on the front panel of the system.
2. From the Advanced setup menu, select
LOAD MENU FROM FILE and press the
button.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.