Text Search; Log File - Digimerge VB300 SERIES Instruction Manual

TEXT SEARCH*

Use the Text Search to find recorded data from
a P.O.S. system.
Figure 6.8 Text Search screen
To use Text Search:
1. From the SEARCH menu, select TEXT
SEARCH and press the
2. Under HDD ID, select NORMAL, HDD 1,
or HDD 0.
Note: Normal is the default selection for the
single hard drive included with the system.
3. Press the button to view all the Text
marks on the system. Go to step 4.
OR
3. Press the buttons to select a specific
date and time. Pr
change the values and then press the
button to view bookmarks.
4. Press the
mark from the list and then press the
button to begin playback.
5. Press the button to exit playback
mode (left-click or move the scroll wheel of
using a mouse) and return to live mode.
*Compatible P.O.S. system required.
button.
e buttons to
ess th
buttons to select a Text

LOG FILE

Use the Log File to see a list of the activities
and events on the system.
Note: You must connect a USB drive to the
system in order to view log files.
Figure 6.9 Log File screen
To view the Log File:
1. If not already connected, connect a USB
flash drive to the front panel of the system.
2. From the SEARCH menu, select LOG
FILE and press the
3. Press the button to view log for the
entire system.
OR
3. Under SEARCH FILE, press the
buttons to select a specific date and time.
Pr e buttons to change the values
ess th
and then press the
log for that specific date.
4. Press the
the list of files.
5. To save the log file, press the the
button to return to SEARCH FILE. Select
SAVE LOG and press the
log file is saved to the connected USB
drive as
DvrLog.txt
Search
button.
button to view the
buttons to scroll down
button. The
25