Setting The Time - Digimerge VB300 SERIES Instruction Manual

Setting the Time

Setting the Time
You should set the time on the system prior to doing any recording. You can set the time manually,
or set the time according to an Internet server (Internet connection and DDNS service required).
To set the date and time:
1. Press the button to open the system menu. Select and press the button.
2. Select CLOCK and press the button.
3. From the CLOCK menu, select DATE&TIME and press the button.
4. Press the
the buttons to select the year, month, day, hour, minute, and seconds. Press
buttons to adjust the date and time.
Figure 4.0 Clock menu
5. Press the the button to save the date and time.
6. Press the button on the remote control until you see the Save/Exit screen. Select SAVE
ONLY or SAVE AND EXIT to save your settings.
You can also configure the time zone, daylight savings time, and have the system to use the
Internet to set the time (network connection required). See "CLOCK" on page 47.
17