Table of Contents
Advertisement
Record Settings
On the Main menu, selecting the Record option will allow you to set the quality and speed of
recordings.
Pressing ENTER after scrolling to the Record option will bring up the following menu
options:
(RECORD)
HDD Overwrite: NO
Record IPS: 25A
Record Quality: Normal
Alarm Rec IPS: 25A
Alarm Rec Quality: Normal
Motion Trigger Record: ON
HDD Overwrite Setup
1.
Press ENTER to confirm HDD OVERWRITE setup.
2.
Press ▲ / ▼ to choose HDD OVERWRITE.
NO:
When HDD full will stop recording
YES: When HDD full will overwrite the HDD recording
3.
Press MENU to exit and confirm current operation.
4.
Press MENU again to exit and close HDD OVERWRITE setup mode.
Record IPS Setup
1.
Press ENTER to confirm RECORD IPS setup.
2.
Press ▲ / ▼ to choose IPS record speed. Note that '25A' indicates 25 ips with audio.
NTSC: 25A, 15, 8, 4, 2, 1
PAL: 18A, 12, 6, 3, 2, 1
3.
Press MENU to exit and confirm current operation.
4.
Press MENU again to exit and close RECORD IPS setup mode.
Record Quality Setup
1.
Press ENTER to confirm Record Quality setup.
2.
Press▲ / ▼ to choose Record Quality level.
BEST, HIGH, NORMAL, BASIC
3.
Press MENU to exit and confirm current operation.
4.
Press MENU again to exit and close RECORD QUALITY setup mode.
Alarm REC IPS Setup
1.
Press ENTER to confirm ALARM REC IPS setup.
2.
Press ▲ / ▼ to choose ALARM REC IPS record speed.
NTSC: 25A, 15, 8, 4, 2, 1
PAL: 18A, 12, 6, 3, 2, 1
3.
Press MENU to exit and confirm current operation.
4.
Press MENU again to exit and close ALARM REC IPS setup mode.
Alarm REC Quality Setup
1.
Press ENTER to confirm ALARM REC QUALITY setup.
2.
Press▲ / ▼ to choose ALARM REC QUALITY level.
BEST, HIGH, NORMAL, BASIC
3.
Press MENU to exit and confirm current operation.
4.
Press MENU again to exit and close ALARM REC QUALITY setup mode.
12
(Menu)
Search
Timer
► Record
Camera
System
Event
Network
Advertisement
Table of Contents
