Title; Multi Screen - Digimerge VB300 SERIES Instruction Manual

Using the Main Menu

TITLE

Edit the titles (names) for each channel.
Figure 9.3 Title menu
To change a channel title:
1. Press the
channel and then press the
Press the
2. In the Character Table screen, use the
buttons
the title and then press the
Note: Titles can only be seven characters
in length. Use blank spaces in the Character
Table for spaces in your title.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
To change the BITMAP TITLE, you must use
the client software to transfer a new bitmap file.
30
buttons to select a
button.
buttons to turn pages.
to select characters for
button.

MULTI SCREEN

Change the configurations for the five
multi-screen display views.
Figure 9.4 Multi Screen menu
Press the buttons to select MULTI 4E,
MULTI 7, MULTI 9B, MULTI 10, or MULTI 13
and then press the
Under DISPLAY, press the
select ON/OFF to enable/disable the specific
multi-display. If set to OFF, the screen display
will not appear when pressing the
button.
Press the
number in the layout. These numbers
represent the channels being displayed on
screen.
Press the buttons to change the selected
channel.
Press the button on the remote control
until you see the Save/Exit screen. Select
SAVE ONLY or SAVE AND EXIT to save your
settings.
button.
buttons and
to select a
buttons