Video Standard; Language; Remote Control Id; Key Echo - Digimerge VB300 SERIES Instruction Manual

Using the Main Menu

VIDEO STANDARD

To set the video standard for the system:
1. From the System menu, select VIDEO
STANDARD. Press the
select NTSC, PAL, or AUTO.
Note: If you select AUTO, the system will
automatically detect NTSC or PAL.
2. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.

LANGUAGE

To set the language for the system:
1. From the System menu, select
LANGUAGE. Press the
select ENGLISH, FRENCH, SPANISH,
GERMAN, JAPANESE, ITALIAN,
PORTUNGESE, TURKISH, RUSSIAN, or
POLISH.
2. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.

REMOTE CONTROL ID

To set the remote control ID for the system:
1. From the System menu, select REMOTE
CONTROL ID. Press the
select 11,12, 13, 14, 21, 22, 23, 24, 31, 32,
33, 34, 41, 42, 43, 44, or ALL.
2. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
44

KEY ECHO

Enable/disable the keep beep when pressing
buttons on the remote control or front panel.
To enable/disable key echo:
buttons to
1. From the System menu, select KEY
2. Press the
buttons to
buttons to
ECHO. Press the
or OFF.
button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
buttons to select ON