Dvr Name; Dvr Location; Bandwidth - Digimerge VB300 SERIES Instruction Manual

DVR NAME

Enter a name for the system. This name will
appear in outgoing email notifications when
events occur.
Figure 13.4 Character Table—DVR name
To enter a name for the DVR:
1. From the LINK menu, select DVR NAME
and press the
table opens.
2. Press the
to enter a name for the system. The name
can be alpha-numeric and have a
maximum of nine characters.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
button. The character
and buttons

DVR LOCATION

Enter a location for the system. This location
will appear in outgoing email notifications when
events occur.
Figure 13.5 Character Table—DVR location
To enter a location for the DVR:
1. From the LINK menu, select DVR
LOCATION and press the
character table opens.
2. Press the
to enter a location for the system. The
location can be alpha-numeric and have a
maximum of nine characters.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.

BANDWIDTH

Set the bandwidth used by the system.
To set the bandwidth:
1. From the LINK menu, select
BANDWIDTH.
2. Press the buttons and select from
0MB~10MB.
Using the Main Menu
button. The
and buttons
51