Access Point Specifications - Cisco Aironet 1550 Series Hardware Installation Manual

Access Point Specifications

Table D-1
detailed specifications, refer to the Cisco Aironet 1550 Series Outdoor Access Point data sheet at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
Table D-1 Access Point Specifications
Category
Size 12.0 in. x 7.8 in. x 6.4 in. (30.48 cm x 19.81 cm x 16.26 cm) (including antenna mount)
Weight
Connector
Power sources
(see Table D-2 and
Table D-3 for power
distribution budget)
OL-24247-01
lists the technical specifications for the Cisco Aironet 1552 Outdoor Mesh Access Points. For
Specifications
1552E: 17.3 lbs (7.8 kg)
•
1552C: 14 lbs (6.4 kg)
•
1552H: 17.6 lbs (8 kg)
•
1552I: 14 lbs (6.4 kg)
•
• Battery backup: 1.5 lbs (0.7kg)
• Pole mounting bracket: 6.1 lbs (2.8 kg)
• Cable strand mounting bracket: 1.3 lbs (0.6 kg)
Two or three Type N antenna connectors for 2.4-GHz radio (depends on configuration)
•
One Type N antenna connector (for 5-GHz radio)
•
Optional AC power connector—3-pin Remke Mini-Link 50909 connector
•
Internal PoE-in connector (uplink port)—RJ-45 connector
•
Internal PoE-out connector (downlink port)—RJ-45 connector
•
Optional internal SFP fiber module—Single strand LC fiber connector
•
• Optional cable connector—Stinger connector (customer supplied)
100 to 240 VAC, 50–60 Hz (model 1552H)
•
100 to 480 VAC, 50 to 60 Hz (model 1552E)
•
100 to 277 VAC, 50 to 60 Hz (model 1552I)
•
40 to 90 VAC, 50 to 60 Hz, quasi-square wave, Power over Cable (POC) (model 1552C)
•
Power over Ethernet (PoE): 56 VDC percent
•
12 VDC
•
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
A P P E N D I X
D
D-1