Access Point Specifications - Cisco Aironet 1130AG Hardware Installation Manual

Access Point Specifications

Table C-1
Table C-1 Access Point Specifications
Category 802.11b Radio Specifications
Size 7.53 in. W x 7.53 in. D x 1.31 in. H
19.13 cm W x 19.13 cm D x 3.33 cm H
Indicators Tri-color Status LED indicator on the top panel and two bi-color LED indicators (radio and Ethernet)
in the cable bay
Connectors Cable bay (left to right)
Input Voltage 48 VDC (nominal)
Input Power 12.95 W (typical)
Operating Temperature Base unit:
1130AG series power module:
Weight Without mounting hardware:
Power Output 100 mW (20 dBm)
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
1 mW (2 dBm)
0.5 mW (-1 dBm)
(Depending on the regulatory
domain in which the access
point is installed)
Antenna A diversity system with two integrated 3-dBi antennas.
OL-6226-02
lists the technical specifications for the Cisco Aironet 1130AG Series Access Point.
Power connector (for plug-in AC power module); RJ-45 connector for 10BASE-T or
100BASE-T Ethernet connections; upside down RJ-45 connector for serial connections.
o o
32 to 104 F (0 to 40 C)
o o
32 to 104 F (0 to 40 C)
1.48 lbs (0.67 kg)
A P P E N D I X
802.11g Radio Specifications
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
1 mW (2 dBm)
0.5 mW (-1 dBm)
(Depending on the regulatory
domain in which the access point
is installed)
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
C
802.11a Radio Specifications
50 mW (17 dBm)
30 mW (15 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
1 mW (2 dBm)
0.5 mW (-1 dBm)
(Depending on the regulatory
domain in which the access point
is installed)
A diversity system with two
integrated 4.5-dBi antennas.
C-1