Table of Contents
Advertisement
Access Point Specifications
Table D-1
Hazardous Locations. For detailed specifications, refer to the Cisco Aironet 1550 Series Outdoor Access
Point data sheet at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps11451/data_sheet_c78-641373.html
Table D-1
Access Point Specifications
Category
Size
12.0 in. x 7.8 in. x 6.4 in. (30.48 cm x 19.81 cm x 16.26 cm) (including antenna mount)
Weight
Connector
lists the technical specifications for the Cisco Aironet 1552 Outdoor Mesh Access Points for
Specifications
1552SA/1552SD (AC): 18.5 lbs (8.4 kg)
•
1552SA/1552SD (DC): 17.5 lbs (7.9)
•
1552H: 17.6 lbs (8 kg)
•
1552WU: 17.6 lbs (8 kg)
•
Pole mounting bracket: 6.1 lbs (2.8 kg)
•
•
1552H: Three Type N antenna connectors for 2.4 GHz radio and 5 GHz 802.11n radio (depends
on configuration)
•
1552S: Five Type N antenna connectors for 2.4 GHz radio and 5 GHz 802.11n radio (depends
on configuration)
1552WU: Seven Type N antenna connectors for 2.4 GHz radio and 5 GHz 802.11n radio
•
(depends on configuration)
1552S: Two Type N antenna connector (2.4 GHz ISA100 Wireless and WirelessHART
•
Multiprotocol radio)
Internal PoE In or ETH connector (uplink port)—RJ-45 connector
•
Internal PoE Out connector (downlink port)—RJ-45 connector
•
1552H and 1552S: Optional internal SFP fiber module—LC fiber connector
•
1552WU: 2.4 GHz WirelessHART radio for communicating with sensor devices by a single
•
Type N connector for the WirelessHART 2.4 GHz antenna. This antenna is intended to be
connected using a low-loss coaxial cable.
A P P E N D I X
Cisco Aironet 1552 Series for Hazardous Locations Installation Guide
D
D-17
Advertisement
Table of Contents
