Access Point Specifications - Cisco Aironet 340 Series Hardware Installation Manual

Access Point Specifications

Access Point Specifications
Cisco Aironet Access Point Hardware Installation Guide
1-8
Table 1-1 lists specifications for the Access Point.
Table 1-1 Access Point Specifications
Category
Physical
Size
Status indicators
Connectors
Voltage range
Operating temperature range
Weight
Radio
Power output
Frequency
Chapter 1
Specification
6.30 in. (16 cm) wide x 4.72 in. (12 cm)
deep x 1.45 in. (3.7 cm) high
Three indicators on the top panel:
Ethernet traffic, status, and radio
traffic
On the back panel: An RJ-45 jack for
10/100 Ethernet connections; a
nine-pin serial connector; a power
connector (plug-in AC adapter) for a
regulated 5V input (340 series only)
24 to 60 VDC (regulated 5 VDC for
340 series only)
o o o
F to 158 F (-30 C to 70
-22
o o
series; 32 F to 158 F (0
340 series
Less than 1 lb (0.45 kg)
100 mW (30 mW for 340 series only)
2.400 to 2.497 GHz (Depending on the
regulatory domain in which the Access
Point is installed)
Overview
o
C) for 350
o o
C to 70 C) for
OL-0738-01