Mounting The Access Point On A Pole - Cisco Aironet 1550 Series Hardware Installation Manual

Chapter 2 Installing the Access Point

Mounting the Access Point on a Pole

When installing an access point on a vertical pole, mast, or a streetlight pole, you should use the optional
Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
Assembling the Pole Clamp Bracket and the Mounting Bracket
When installing an access point on a pole, mast, or a streetlight, you should use the optional Cisco pole
mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
The pole mount kit contains several parts that you must assemble prior to mounting on a pole. First you
need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter
you are using to mount the access point.
on the pole clamp bracket.
Figure 2-8
1
To assemble the pole clamp bracket, follow these steps:
OL-24247-01
Pole Clamp Bracket Adjustment Hole Locations
Pole size indicators
2 to 6 in.
•
6 to 11 in.
•
11 to 16 in.
•
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
Figure 2-8 illustrates the pole diameter indicators and bolt holes
2 Bolt holes for pole diameters (11 to 16
inches indicated)
Installing the Access Point
2-19