Chapter 2
Installing the Access Point
Figure 2-13
1
Ground lug screw holes location
2
M8 x16 bolt hole (bolts are supplied with pole
mount kit; install without flat or lock washers)
Position the two bolts on the access point into the access point quick-mount notch on the mounting
Step 12
bracket (see
Note
OL-24247-01
Location of Access Point Top Support Bolt Holes
Figure
2-14).
The access point should be positioned with the LEDs on the bottom to allow viewing from the
ground and with the hinged cover facing out.
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
1
2
3
3
Second M8 x16 bolt hole location
Installing the Access Point
2-25