Cisco Aironet 1550 Series Hardware Installation Manual page 76

Installing the Access Point
Figure 2-24
1 M8 x16 bolt (supplied with pole mount kit)
2
M8 x16 bolt (supplied with pole mount kit)
Position the two bolts on the access point into the quick mount notches on each side of the mounting
Step 5
bracket (see
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
Step 6
point.
Ensure that the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs
Step 7
(17.6 to 20.3 Nm).
Step 8 Continue with the
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-36
1552C Access Point Facing Up in Vault Location
Figure 2-22). Ensure that the hinged door is facing out.
"Powering the Access Point" section on page
Chapter 2
3 F-connector
2-44.
Installing the Access Point
1
2
3
OL-24247-01