Access Point Specifications - Cisco Aironet 350 Series Hardware Installation Manual

Access Point Specifications

Access Point Specifications
Table 1-1 lists specifications for the access point.
Table 1-1
Category
Physical
Radio
Hardware Installation Guide for Cisco Aironet 350 Series Access Points Running Cisco IOS Software
1-8
D r a f t 1 - C I S C O C O N F I D E N T I A L
Access Point Specifications
Size
Status indicators
Connectors
Voltage range
Operating temperature range
Weight
Power output
Frequency
Range
Modulation
Data rates
Specification
6.30 in. (16 cm) W x 4.72 in. (12 cm) D x 1.45 in. (3.7 cm) H
Three indicators on the top panel: Ethernet traffic, status, and
radio traffic
On the back panel: An RJ-45 jack for 10/100 Ethernet
connections; a nine-pin serial connector
24 to 60 VDC
o o
32 to 122 F (0 to 50 C) for 350 series
o o
–4 to 131 F (–20 to 55 C) for 350 series metal case
o o
32 to 104 F (0 to 40 C) for power injectors
Less than 1 lb (0.45 kg) for 350 series with plastic case
1.43 lbs (0.64 kg) for 350 series with metal case
100, 50, 30, 20, 5, or 1 mW for 350 series
(Depending on the regulatory domain in which the access point
is installed)
2.400 to 2.497 GHz (Depending on the regulatory domain in
which the access point is installed)
Indoor:
150 ft at 11 Mbps
350 ft at 1 Mbps
Outdoor:
800 ft at 11 Mbps
2000 ft at 1 Mbps
Direct Sequence Spread Spectrum
1, 2, 5.5, and 11 Mbps
Chapter 1 Overview
OL-7467-01