Hardware Features - Cisco Aironet 1550 Series Hardware Installation Manual

Hardware Features

For specific regulatory domains supported by each 1552 access point model, refer to the Wireless LAN
Compliance Status at:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet0900aecd805
37b6a.html
To locate the 1552 access point models, click on 802.11abgn Mesh Access Points.
Hardware Features
This section describes the hardware features of the 1552 access point models. The following hardware
features are described in this section:
•
•
•
•
•
•
•
•
•
Connectors
Figure 1-1
external antenna Type-N connectors.
The illustrations in this document show all available connections for the access point. Unused
Note
connections are capped with a connector plug to ensure the watertight integrity of the access point.
Liquid-tight adapters are provided for connector openings, which can be installed before or after
deploying the access point.
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
1-6
Connectors, page 1-6
Multiple Radio Operation, page 1-11
Antenna Configurations, page 1-12
Multiple Power Sources, page 1-15
Ethernet (PoE) Ports, page 1-17
Metal Enclosure, page 1-18
Cable Modem (POC), page 1-16
Fiber Option, page 1-17
Optional Hardware, page 1-18
through Figure 1-6 show the access point connectors for all models.
Chapter 1 Overview
Figure 1-7 shows the
OL-24247-01