Access Point Specifications - Cisco Aironet 340 Series Hardware Installation Manual

Access Point Specifications

Access Point Specifications
Table 1-1 lists specifications for the access point.
Table 1-1
Category
Physical
Radio
Cisco Aironet Access Point Hardware Installation Guide
1-8
Access Point Specifications
Size
Status indicators
Connectors
Voltage range
Operating temperature range
Weight
Power output
Frequency
Range
Modulation
Data rates
Specification
6.30 in. (16 cm) W x 4.72 in. (12 cm) D x 1.45 in. (3.7 cm) H
Three indicators on the top panel: Ethernet traffic, status, and
radio traffic
On the back panel: An RJ-45 jack for 10/100 Ethernet
connections; a nine-pin serial connector; a power connector
(plug-in AC adapter) for a regulated 5V input (340 series
only)
24 to 60 VDC (regulated 5 VDC for 340 series only)
o o
32 to 122 F (0 to 50 C) for 340 and 350 series
o o
–4 to 131 F (–20 to 55 C) for 350 series metal case
o o
32 to 104 F (0 to 40 C) for power injectors
Less than 1 lb (0.45 kg) for 340 and 350 series
1.43 lbs (0.64 kg) for 350 series metal case
100, 50, 30, 20, 5, or 1 mW for 350 series
30, 20, 5, or 1 mW for 340 series
(Depending on the regulatory domain in which the access point
is installed)
2.400 to 2.497 GHz (Depending on the regulatory domain in
which the access point is installed)
Indoor:
150 ft at 11 Mbps (100 ft for 340 series only)
350 ft at 1 Mbps (300 ft for 340 series only)
Outdoor:
800 ft at 11 Mbps (400 ft for 340 series only)
2000 ft at 1 Mbps (1500 ft for 340 series only)
Direct Sequence Spread Spectrum
1, 2, 5.5, and 11 Mbps
Chapter 1 Overview
OL-0738-02