Automatic Switch-Off; Energy-Saving Mode; Restore Factory Settings - Jura ENA 8 Instructions For Use Manual

Product
Hot water
Permanent settings in programming mode always
follow the same model.
Example: Proceed as follows to change the coffee
strength for one coffee.
Precondition: The start screen is displayed.
T Press the 'Coffee'
2 seconds until the list of possible settings
appears.
'Coffee'
T Press the
'Coffee strength'
'Coffee strength'
T Press the
' < ' or ' > '
setting for the coffee strength.
T Press the 'Save' button.
'Saved' appears briefly on the display.
'Coffee'
T Press the 'Back' button to return to the start
screen.

Automatic switch-off

By instructing your ENA to automatically switch
itself off, you can cut down your energy
consumption. If this function is activated, your ENA
switches off automatically after the preset time
following the last action on the machine.
You can set the automatic switch-off to 15 minutes,
30 minutes or 1-9 hours.
Precondition: The start screen is displayed.
T Press the ' P ' button for approximately
2 seconds to enter programming mode.
T Press the
'  ' button.
T Press the
'Machine settings'
T Press the
'Switch off after'
'Switch off after'
T Press the ' < ' or ' > '
setting.
T Press the 'Save' button.
'Saved' appears briefly on the display.
'Machine settings'
Coffee strength Amount
– Water: 0.5 oz – 15 oz
(25 ml – 450 ml)
button for approximately
button.
button to change the
button.
button.
button to change the
4 Permanent settings in programming mode
T Press the 'Back' button for approximately
2 seconds to return to the start screen.

Energy-saving mode

In the program item 'Machine settings'
energy' you can set an energy-saving mode:
U
'Save energy' / 'Active'
U
Soon after the last preparation, the ENA
stops heating up.
U
Before you can prepare a coffee specialty,
coffee specialty with milk, or hot water, the
machine must heat up.
U
'Save energy' / 'Inactive'
U
All coffee specialties, coffee specialties with
milk and hot water can be prepared without
having to wait.
Example: Proceed as follows to deactivate the
energy-saving mode.
Precondition: The start screen is displayed.
T Press the ' P ' button for approximately
2 seconds to enter programming mode.
T Press the
'  ' button.
T Press the
'Machine settings'
T Press the 'Save energy'
'Save energy'
T Press the 'Inactive'
T Press the 'Save' button.
'Saved' appears briefly on the display.
'Machine settings'
T Press the 'Back' button for approximately
2 seconds to return to the start screen.

Restore factory settings

In the program item 'Machine settings'
setting' the machine can be reset to its factory
setting.
More settings
Temperature (low,
normal, high)
/ 'Save
button.
button.
button.
/ 'Factory
19
en
fr
it
en
fr
es
pt