Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 46

CARE & MAINTENANCE
TO REPLACE COVER:
A. Feed the harness tongues and shoulder straps through lap strap slots.
B. Stretch the cover over the top of the restraint first, then the sides of the child restraint, and then
stretch the cover around the rim of the restraint. Feeding through the harness adjuster button and
crotch strap.
C. Clip the plastic flaps in slots of air cushion, on either side of restraint.
D. Replace the elastic loops behind the restraint and at the front of the restraint underneath the
stabilising bar.
E. Fit the headrest cover over the headrest and feed the harness through the open slots in cover,
ensure elastic is at the rear of headrest, behind cushions. Clip in press studs to the moulding.
F. Refit the Infant Safety Cushion™ Insert, if required. See page 22 suitability.
G. Ensure the harness straps are not twisted.
46