Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 38

HOW TO INSTALL
ADJUSTING AHR EASY ADJUST HEADREST AND HARNESS
STRAP HEIGHT
A. Loosen the harness straps before adjusting the headrest.
B. You do not need to remove the restraint from the vehicle
to adjust the harness or headrest positions. Small
adjustments may be done with the child in the seat, the
child will need to lean forward to allow the headrest to
be adjusted.
C. To adjust the headrest, lift the red Easy Adjust lever at the
top of the headrest then gently pull up or push down the
headrest so that the shoulder strap slots are level with
or slightly above your child's shoulders. If the headrest
is just above the shoulders then the harness level will be
correct. Refer to page 37.
D. Release AHR Easy Adjust Headrest Lever so that it locks
into position. Ensure that it has locked in position by
gently pushing down on it.
E. If the headrest is adjusted with the child in the seat,
always check that the headrest cover has not bunched
up behind child's back.
NOTE: For comfort ensure the bottom edges of the
headrest are not contacting the child's shoulders.
38
AHR Easy Adjust
Headrest Lever
Lift the lever
at the top of
the headrest
then gently
pull up or
push down
the headrest
Do not adjust the headrest by pulling
on the Side Impact Cushion.