D. If using a lap-sash seatbelt, open the rearward
facing lock-off. Fully lengthen the seatbelt and
feed the seatbelt through the closest seatbelt path
slot and pass across the seating surface behind
the crotch buckle straps and through the opposite
REARWARD FACING
slot. Follow the blue
BELT PATH
label.
Lock-off (open)
on both sides
E. Engage seatbelt buckle and tongue. Firmly push
down on the seat with knee or hand, whilst pulling
the sash belt with the other hand to tighten the
seatbelt. while holding the tension, close the
lock-off on the buckle side, which will then hold
this tension. Close the lock-off on the other sash
side (but only clamping the lap portion). See
illustrations on page 16. Do not use the lock-off if
the buckle interferes with closing the lock-off.
NOTE: Seatbelt buckle and tongue must not rest
between restraint cover and restraint. If seatbelt
buckle is adjustable, adjust buckle as low as
possible away from the restraint.
Seatbelt path slot
HOW TO SETUP
D
Pass buckle tongue through slots 1 and 2.
REARWARD FACING
Blue -
BELT PATH
label.
Push down on the seat
E
Pass buckle tongue through here
2
1
15