Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 14

HOW TO SETUP
INSTALLING INTO THE CAR
(USING SEATBELT)
A. Place restraint rearward facing in the chosen
seating position with the Messy Mat™(if fitted)
positioned centrally in the seating position.
B. Undo the buckle and place buckle tongues in the
Harness Tongue Holders on each side of the cover.
Lift the flap at the end of the seat sufficiently to
access the stabilising bar, pull out stabilising bar
and then gently push bar forward until you hear a
click. The Stabilising bar is now latched in place.
D. Remove the Infant Safety Cushion™ Insert,
and gently lift headrest trim end, then pull back
downwards the centre panel flap and Ez Buckle
System, including the comfort pad from the inner
seat of trim.
14
Click
Harness
Tongue
Holders
Infant Safety Cushion™ Insert
Headrest trim end
D
B
1. Lift flap
enough to
access the
stabilising bar
2. Pull out
Stabilising bar
3. Then push
bar forward
Centre
panel flap