Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 23

ADJUSTING AHR EASY ADJUST HEADREST AND HARNESS
STRAP HEIGHT
A. Loosen the harness straps before adjusting the headrest.
B. You do not need to remove the restraint from the vehicle
to adjust the harness or headrest positions. Small
adjustments maybe done with the child in the seat, the
child will need to lean forward to allow the headrest to
be adjusted.
C. To adjust the headrest, lift the Easy Adjust lever at the
top of the headrest then gently pull up or push down the
headrest so that the shoulder strap slots are level with
or slightly above your child's shoulders. If the headrest
is just above the shoulders then the harness level will be
correct.
D. Release AHR Easy Adjust Headrest Lever so that it locks
into position. Ensure that it has locked in position by
gently pushing down on the headrest.
E. If the headrest is moved up, then down with the child in
the seat, before use, check that the headrest cover has
not bunched up behind child's back.
NOTE: For comfort ensure the bottom edges of the
headrest are not contacting the child's shoulders.
HOW TO INSTALL
AHR Easy Adjust
Headrest lever
Lift the Easy Adjust
lever at the top of
the headrest then
gently pull up or
push down the
headrest
C
Do not adjust the headrest by pulling
on the Side Impact Cushion.
23