Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 26

HOW TO USE
G. Retighten adjustable upper anchorage strap
by pulling adjustment strap to remove slack as
shown.
H. Always roll up excess strap tightly so the
webbing is thick enough to be held in the
storage band.
REMOVING BABY FROM RESTRAINT
A. Press upper anchorage strap adjuster button while
pulling upper anchorage straps to slacken. Allow
upper anchorage straps to fall to the sides for easy
access into restraint.
B. Push and hold the harness adjustment button while
pulling both shoulder harness straps to slacken
harness to the desired amount.
C. Press the red button on harness buckle then both
harness tongues will be released. Insert buckle
tongues into harness tongue holders to hold harness
straps away from the child. Move each shoulder strap
to baby's side then pick up baby.
26
Press
Pull Adjustment
Strap to remove
G
slack
Roll up excess
strap tightly so the
webbing is thick
enough to be held
in the storage band.
H
Harness
Tongue Holders
Storage
Band