Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 37

ADJUSTING HARNESS STRAP HEIGHT AND
HEADREST
Correct fitment of the harness is very important as it restrains the child
in the restraint. The harness must fit firmly around the upper torso of the
child and be positioned so as to leave the child's arms and legs free.
The headrest must be in the position where the top of the shoulder
slots are nearest to the child's shoulders, but not more than 25mm
below the child's shoulders. If the headrest is in the top position
and the shoulders are above the upper shoulder height marker then
the child is too tall for the restraint and the restraint should not be
used; move to next type of restraint (see pages 8).
The shoulder straps must be in
the slots which are nearest to
the child's shoulders, but not
more than 25mm below the
child's shoulders.
NOTE: This child restraint
does not require the
shoulder straps to be
disconnected to adjust
their height, only the
headrest needs to be
moved to adjust the
shoulder strap position.
Upper shoulder
(Height marker
hidden when the
headrest is not
at full height)
Lower
shoulder
height marker.
Harness tongues
and buckle.
Crotch strap slots.
HOW TO INSTALL
25mm
Harness
Shoulder
slots.
Lap
strap
slots.
Adjuster
button.
Harness
adjuster
strap.
37