Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 21

ADJUSTING HARNESS STRAP HEIGHT & HEADREST:
FOR REARWARD-FACING MODE
Correct fitment of the harness is very important as it restrains the baby in the restraint. The headrest
must be in the correct position and the harness must fit firmly around upper torso of the baby and be
positioned so as to leave the baby's arms and legs free.
For babies in rear facing mode the headrest must be in the position where the top of the shoulder strap
slots are nearest to the child's shoulders, but not lower than the child's shoulders. Instructions for
adjusting the headrest is on the next page. If your baby has reached the lower shoulder height marker
then the restraint should be converted for "toddler use" (Refer to Forward Facing section starting on
page 28).
Lower shoulder
height marker.
Harness tongues and
buckle.
Crotch strap slots.
HOW TO INSTALL
Harness
shoulder slots.
Lap strap slots.
Adjuster button.
Harness adjuster strap.
21