Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 4

• Use the restraint exactly as shown in the instructions.
• Fit the restraint firmly to the car seat.
• Fit the harness firmly to the child.
• A loose restraint or harness is dangerous.
• Supervision of children is needed because they may be able to undo buckles and adjusters.
• DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
• Do not alter or modify this restraint.
• Repairs must only be done by the manufacturer or agent.
• Do not allow the restraint to come into contact with polishes, oils, bleach and other chemicals.
• Destroy the restraint if it has been in a severe crash, even if no damage is visible.
• DO NOT USE THIS RESTRAINT WITHOUT A COVER.
• Regularly check the restraint components, straps & other fitments for correct function and
condition. Seek prompt repair.
• To ensure baby's back is evenly supported do not put more than one nappy on the baby and
make sure the nappy is not thickly folded at the back.
• If an airbag is fitted in the desired seating position where the child restraint is to be fitted, follow
the vehicle manufacturer's warnings and instructions.
• DO NOT USE A REAR-FACING CHILD RESTRAINT WHERE AN AIRBAG IS FITTED IN THE FRONT
OF THE SEATING POSITION.
• The restraint should not be purchased or sold as a second hand item. It is recommended not to
use child restraints older that 10 years as the protection in an accident may be reduced.
• THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE ANCHORAGE STRAP MAY FALL
INTO A SPLIT IN THE SEAT BACK (E.G. HATCHBACK OR WAGON).
4