Britax SICT Easy Adjust 7200/A/2010 Series Instructions For Use Manual page 25

E. Fit either harness tongue into
the harness buckle followed by
the other tongue until a click is
heard. Should the second tongue
not insert, press the red button
and reinsert the tongues. Ensure
secure engagement by pulling
harness straps.
F. Remove slack from harness lap
straps by pulling shoulder straps.
Then pull the adjuster strap below
the push button - See illustration D
on page 24.
CAUTION: A LOOSE HARNESS IS DANGEROUS.
Make sure that nothing is obstructing harness straps and that baby's arms and legs are free with
the straps in the correct location - see previous page.
Do not use the restraint if straps do not tighten and contact BRITAX Childcare Customer Service.
Refer to back cover for details.
IMPORTANT:
The Infant Safety Cushion™ Insert is designed to snugly support baby for extra support and comfort
and must be used for smaller babies. Discontinue use when baby's shoulder's reach the Lower
Shoulder Height Marker or the Insert is a tight fit or creates discomfort for larger babies.
Tongue
Buckle
E
Pull to remove
slack from
harness lap
straps
F
HOW TO USE
Click
Shoulder Straps
Harness Lap Straps
Crotch Straps
25