1-3-1 Unpacking and installation
(1) Installation procedure
Remove the tapes and pad.
Install the optional paper feeder or
Remove the pins holding light source units 1 and 2.
Install the original cover or the DP.
Install other optional devices.
Install the toner container.
Install the toner disposal tank.
Connect the power cord.
Start
Unpack.
large paper deck.
Carry out initial developer setting
(maintenance item U130).
Load paper.
Output an own-status report
(maintenance item U000).
Exit maintenance mode.
Print out the user setting list.
Make test copies.
Completion of the machine installation.
2FD/2FF/2FG
1-3-1