Olivetti d-Copia 300 Service Manual page 303

2FD/2FF/2FG
(3) Motors
11,12,13
2
1. Drive motor (DM) ......................................... Drives the machine.
2. Paper feed motor (PFM) .............................. Drives paper feed section.
3. Upper lift motor (LM-U) ................................ Drives upper drawer lift.
4. Lower lift motor (LM-L) ................................. Drives lower drawer lift.
5. Scanner motor (SM) .................................... Drives the optical system.
6. Eject motor (EM) .......................................... Drives the eject section.
7. Cooling fan motor 1 (CFM1) ........................ Cools the machine interior.
8. Cooling fan motor 2 (CFM2) ........................ Cools the machine interior.
9. Cooling fan motor 3 (CFM3) ........................ Cools the machine interior.
10. Cooling fan motor 4 (CFM4) ........................ Cools the machine interior (around the power supply unit).
11. Cooling fan motor 5 (CFM5) ........................ Cools the machine interior and supports paper transfer for duplex
12. Cooling fan motor 6 (CFM6) ........................ Cools the machine interior and supports paper transfer for duplex
13. Cooling fan motor 7 (CFM7) ........................ Cools the machine interior and supports paper transfer for duplex
14. Polygon motor (PM) ..................................... Drives the polygon mirror.
2-2-4
6
7
1
14
3
4
Figure 2-2-3 Motors
copying.
copying.
copying.
5
9
8
10
Machine front
Machine inside
Machine rear