Periodic Maintenance Procedures - Olivetti d-Copia 300 Service Manual

2FD/2FF/2FG

Periodic maintenance procedures

Maintenance
Section
part/location
Test copy and Perform at the maximum
test print copy size
Maintenance
Section
part/location
Paper feed Upper/lower paper feed
section pulley
Upper/lower separation
pulley
Upper/lower forwarding
pulley
Bypass paper feed pulley
Bypass separation pulley
Bypass forwarding pulley
Bypass feed roller 1
Bypass feed roller 2
Left registration roller
Right registration roller
Feed pulley
Feed roller 1
Feed roller 2
Feed roller 3
Registration switch
Lower regist cleaner
Registration guide
Maintenance
Section
part/location
Optical section Slit glass
Contact glass
Mirror 1
Mirror 2 and mirror 3
Lens
Reflector
Exposure lamp
Optical rail
Original size detection
2-4-16
Method Maintenance cycle
Test copy Every service
Method Maintenance cycle
Replace 400K (30)/500K (40/50) Replace.*
Replace 400K (30)/500K (40/50) Replace.*
Replace 400K (30)/500K (40/50) Replace.*
Replace 400K (30)/500K (40/50) Replace.*
Replace 400K (30)/500K (40/50) Replace. *
Replace 400K (30)/500K (40/50) Replace. *
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with alcohol.*
Clean 400K (30)/500K (40/50) Clean with a dry cloth.
Replace 400K (30)/500K (40/50) Replace.
Replace 400K (30)/500K (40/50) Replace.
Method Maintenance cycle
Clean 400K (30)/500K (40/50) Clean with a dry cloth.
Clean 400K (30)/500K (40/50) Clean with alcohol and then
Clean User call
Clean User call
Clean User call
Clean User call
Clean or replace User call
Grease User call
Clean User call
Points and cautions
Points and cautions
Points and cautions
a dry cloth.
Clean with alcohol and then
a dry cloth only if vertical black
lines appear on the copy image.
Clean with alcohol and then
a dry cloth only if vertical black
lines appear on the copy image.
Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Replace if an image problem
occurs.
Check noise and shifting and
then apply scanner rail grease
PG671.
Clean the sensor emitter and
sensor receiver with alcohol or a
dry cloth only if there is a problem.
*Check and clean with alcohol when user call occurs.
Page
Page
1-6-3
1-6-3
1-6-3
1-6-5
1-6-5
1-6-5
Page