Olivetti d-Copia 300 Service Manual page 105

2FD/2FF/2FG-3.0
(2) Maintenance mode item list
Item
Section
No.
General U000 Outputting an own-status report
U001 Exiting the maintenance mode
U002 Setting the factory default data
U003 Setting the service telephone number
U004 Displaying the machine number
U005 Copying without paper
U018 Displaying the ROM checksum
U019 Displaying the ROM version
Initialization U020 Initializing all data
U021 Initializing counters and mode settings
U022 Initializing backup memory
U024 HDD formatting
Drive, paper U030 Checking motor operation
feed, paper
U031 Checking switches for paper conveying
conveying and
U032 Checking clutch operation
cooling system
U033 Checking solenoid operation
U034 Adjusting the print start timing
U035 Setting folio size
U038 Checking the copier cover switch
U051 Adjusting the amount of slack in the paper
U053 Performing fine adjustment of the motor speed
U060 Adjusting the scanner input properties
Optical
U061 Turning the exposure lamp on
U063 Adjusting the shading position
U065 Adjusting the scanner magnification
U066 Adjusting the leading edge registration for scanning an original on the
U067 Adjusting the center line for scanning an original on the contact glass
U068 Adjusting the scanning position for originals from the DP
U070 Adjusting the DP magnification
U071 Adjusting the DP scanning timing
U072 Adjusting the DP center line
U073 Checking scanner operation
U074 Adjusting the DP input light luminosity
U076 Adjusting the DP input light luminosity
U080 Adjusting exposure in toner economy mode
U089 Outputting a MIP-PG pattern
U091 Checking shading
U092 Adjusting the scanner automatically
* Initial setting for executing maintenance item U020
1-4-10
Maintenance item contents
• Adjusting the leading edge registration
• Adjusting the center line
• Length/Width
• Regist data
• Feed data
• Drive motor
• Eject motor
• Polygon motor
• Main scanning direction/auxiliary scanning direction
contact glass
• DP leading edge registration/DP trailing edge registration
Initial
setting*
-
-
-
***************
-
-
-
-
-
-
-
-
-
-
-
-
0.5/0/-1.5
1.0/0
330/210
-
0/0/0
0/20/0/0/0/0
7
7
0
12
-
0
0/1
-5/10
-4/18
5
-2
0/0
-3/2/-3
-
1
-
-6
-
-
-