Olivetti d-Copia 300 Service Manual page 68

15. Attach the large ejection cover using the two
screws that have secured the upper left cover.
16. Open the front cover and the conveying
cover.
17. Attach the staple cover.
* Tighten the two screws on the left side to
secure the cover with the copier, secure the
front side using the screw that has been
removed in step 3, and secure the right side
using a +TP-A chrome screw M3 × 05.
18. Close the conveying cover and the front
cover. Attach the front ejection cover and the
rear ejection cover using a +TP-A chrome
screw M3 × 05 each.
Large ejection
cover
Figure 1-3-97
+TP-A chrome screw M3 × 05
Staple cover
Figure 1-3-98
+TP-A chrome screw M3 × 05
Rear ejection cover
+TP-A chrome screw M3 × 05
Figure 1-3-99
2FD/2FF/2FG
Front ejection cover
1-3-43