Olivetti d-Copia 300 Service Manual page 80

Initialization procedure after installation of facsimile system
1. Insert the copier power plug to the wall outlet
and turn the power switch on.
2. Run maintenance item U601.
3. Enter a destination code using the numeric
keys (refer to the destination code list) and
then press the start key.
* Enter a destination code with three digits.
Code Destination
000 Japan
009 Australia
080 Hong Kong
084 Indonesia
088
Israel
108 Malaysia
126 New Zealand
136 Peru
137 Philippines
152 Middle East
156 Singapore
4. Enter the OEM code (000) and then press the
start key.
5. Confirm that the display is changed as shown
in the illustration.
* At the position of @, the version number of
the software is displayed.
6. Press the cursor key to change the display to
maintenance item U602.
7. Press the start key and confirm that the
display is changed as shown in the
illustration.
* At the position of @, the version number of
the software is displayed.
8. After completing the installation, run a
communications test to confirm that the fax
system is working correctly.
Code Destination
159 South Africa
169 Thailand
181 U.S.A.
242 South America
243
Saudi Arabia
253 CTR21 (European nations)
Italy
Germany
Spain
U.K.
Netherlands
Code Destination
253 Sweden
France
Austria
Switzerland
Belgium
Denmark
Finland
Portugal
Ireland
Norway
254 Taiwan
INI. KEEP DATA
COMPLETED XXX 000
INI. KEEP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial keep data
Figure 1-3-130
INI. SHIP DATA
COMPLETED XXX 000
INI. SHIP DATA
COMPLETED V@.@@
SELECT THE MAINTENANCE NUMBER.
Initial ship data
Figure 1-3-131
2FD/2FF/2FG
U601
U602
1-3-55